Purpose of the flight and payload description
The Boundary Layer Pressurized Balloons are closed aerostats that keep a nearly constant volume and therefore fly at a quasi-constant density level, acting as Lagrangian tracers of air parcels and meteorological platforms.
The balloon is fabricated by ZODIAC under CNES supervision. It's made of three-laminated polyester of 125 micrometers, has a 2.5m diameter spherical shape and a total mass of approximately 9 kg. This vehicle can fly in layers between the surface and approximately 830 hPa depending of its ballast. As long as a sufficient overpressure is maintained the volume remains constant, except for slight thermal fluctuations producing low amplitude buoyancy oscillations mostly driven by the diurnal cycle.
Scientific instrumentation on board the balloon consists in air pressure, temperature and humidity sensors, and a 3D location GPS receiver. Helium temperature and pressure are also recorded. Data is broadcasted with a mean 15 minutes period, through the ARGOS system. Power is provided by lithium batteries that ensure a mean lifetime of near one month. Batteries, electronics, ARGOS and GPS antenna are all located inside the envelope protected from the salty water when the balloon hits or gets close to the sea surface.
This flight was part of a campaign denominated VASCO (Variabilité Atmosphérique intra-Saisonnière et Couplage Océanique) aimed to study the predictability of intraseasonal convective perturbations in the Indo-Pacific tropical area, the role of air-sea coupling in this intraseasonal variability and the physical origin of the intraseasonal sea surface temperature variability in the western Indian Ocean.
The four balloons launched during the campaign were released during Febraury 2006, from the Mahé airport in Seychelles Islands.
Details of the balloon flight
Balloon launched on: 1/26/2006 at 6:40
Launch site: Seychelles International Airport, Mahe
Balloon launched by: Centre National d'Etudes Spatiales (CNES)
Balloon manufacturer/size/composition: Super Pressure Balloon
End of flight (L for landing time, W for last contact, otherwise termination time): 2/20/2006 at 13:41
Balloon flight duration (F: time at float only, otherwise total flight time in d:days / h:hours or m:minutes - ): 25 d
Campaign: VASCO 2006
- Histoire des Ballons Pressurisés de Couche Limite (BPCL) technical report from the Laboratoire de Météorologie Dynamique
After running StratoCat in an "advertising free" basis for 16 years, I've joined "Ko-Fi" to get funding for the research I do. If you find this website interesting or useful, you can help me to keep it up and running.