Purpose of the flight and payload description
SALOMON is a balloon-borne UV-visible spectrometer designed, like its predecesor AMON, to acquire vertical profiles of O3, NO2, NO3, OClO and OBrO as well as the extinction coefficient of aerosols, at altitudes between 15 and 40 km. SOLOMON uses a remote measurement technique (remote-sensing) by using the moon as source of light. The pointing system, the pivot and the gondola were developed at the Laboratoire de Physique et Chimie de l'Environnement (LPCE), whereas the SAOZ-type spectrometer it carries is the result of joint work with the CNRS Service d'Aéronomie.
The instrument work in automatic mode during flight (including start-up, pointing, spectre acquisition and shut-down). The gondola weighs only 85 kilograms, making both launch and flight easier than with AMON.
Between October 1998 and january 2006, SALOMON performed ten successful flights in mid and high latitude. Since 2007 on it was replaced by an improved version denominated SALOMON-N2.
SALOMON was involved in validation programmes for the ODIN and ENVISAT satellites, as well as in national programmes for measuring nitrogen oxides and stratospheric aerosols.
Details of the balloon flight
Balloon launched on: 1/21/2002 at 20:19
Launch site: European Space Range, Kiruna, Sweden
Balloon launched by: Centre National d'Etudes Spatiales (CNES)
Balloon manufacturer/size/composition: Zero Pressure Balloon model 402z 400.000 m3
Balloon serial number: 402Z Nº 62
End of flight (L for landing time, W for last contact, otherwise termination time): 1/22/2002 at ~ 02:00
Balloon flight duration (F: time at float only, otherwise total flight time in d:days / h:hours or m:minutes - ): 5 h 35 m
Landing site: --- No Data ---
Campaign: ARCHEOPS II
Payload weight: 479 kgs
Gondola weight: 67 kgs
- List of balloons launched from ESRANGE Swedish Space Corporation website
- SALOMON Instrument Website Laboratoire de Physique et Chimie de l'Environnement etde l'Espace
After running StratoCat in an "advertising free" basis for 16 years, I've joined "Ko-Fi" to get funding for the research I do. If you find this website interesting or useful, you can help me to keep it up and running.